Oki ES3640eMFP Configuration Manual page 81

4
4-81 Network Setup options
Network Setup
Service Setup
PServer Setup
NDS Setup
Before entering NDS settings, make sure the Fiery is connected to the
network and that you have configured an NDS directory tree with a
Printer, Print Server, and one or more Print Queue objects for Fiery jobs
(see page 2-39). To perform NDS Setup, you may need permission to
browse the NDS tree. If access to the Print Server is restricted, you
need a login password.
The main objective of NDS Setup is to specify the Print Server object.
In addition, you can indicate the location of the Fiery print queues.
Note: The terms NetWare server, Novell server, and IPX server are in
common use and are used here interchangeably to mean the server on
an IPX network running Novell NetWare networking software.
Enable NDS
Yes/No [No]
Select Yes if the NetWare servers you will use to print to the Fiery are
running NetWare in native mode.
Select NDS Tree
List of trees
Use the arrow buttons to browse the list of NDS trees available to
the Fiery. Press [ENTER] when you have displayed the tree that
contains the Printer, Print Server, and Print Queue objects you
previously defined for the Fiery.
Your new NDS tree selection automatically overwrites any previ-
ous tree selection. If you change the NDS tree selection and there
are also current Bindery settings, you are alerted that they will be
deleted. If you continue with NDS Setup, you can replace Bindery
settings later. If you do not want to continue, press the Back but-
ton to exit NDS Setup.
ES3640e MFP EFI Configuration Guide - 81