Oki ES3640eMFP Configuration Manual page 162

A
A-162 Troubleshooting
After this Setup
screen
Select NDS Tree
(Network
Setup > Service
Setup > PServer
Setup >
NDS Setup)
Navigating NDS tree
(Network
Setup > Service
Setup > PServer
Setup >
NDS Setup)
Bindery Setup
(Network
Setup > Service
Setup > PServer
Setup >
Bindery Setup)
This message
Warning! Selecting a
new NDS tree deletes
Bindery setup.
___ is empty.
If you also plan to use
NDS, set up NDS
before Bindery.
ES3640e MFP EFI Configuration Guide - 162
Means
You have previously connected the Fiery to a
different NDS tree. NetWise supports only a
single NDS tree connection. To avoid a
potential conflict with an existing tree
connection (for example, if the connection
was made through a NetWare 4.x server in
emulation mode), all bindery settings will be
deleted.
If you choose OK, and choose Yes in the
following message (Delete Bindery setup and
continue?), bindery settings are deleted and
have to be re-entered in Bindery Setup.
To avoid deleting the bindery settings, select
OK and choose No in the following message
(Delete Bindery setup and continue?).
Repeat NDS Setup without changing the NDS
tree, or exit to Bindery Setup to review your
current bindery settings.
The chosen container contains no sub-
containers or objects relevant to the current
mode of navigation.
No NDS settings are present. You are
reminded to perform NDS Setup before
Bindery Setup in case your network includes
both NDS and bindery servers.