Figure 11. Installing 26-Pin Floppy Drive Data Cable To Slimline Floppy Drive; Figure 12. Installing Slimline Floppy Drive Into Chassis - Intel A2400SATAKIT2 Installation Manual

3. Open the connector on the rear of the floppy drive by pulling up on the connector cover. See
letter "A" in the figure below.
4. Insert one end of the 26-pin floppy drive data cable end into the connector.
5. Push down on the connector cover to lock the cable into place.

Figure 11. Installing 26-pin Floppy Drive Data Cable to Slimline Floppy Drive

6. Slide the floppy drive assembly into the chassis until it clicks into place. See letter "A" in the
figure below.
7. Open the connector on the backplane by pulling out on the connector cover. See letter "B" in
the figure below.
8. Insert the loose end of the floppy cable into the backplane connector. See letter "C" in the
figure.
9. Push in on the connector cover to lock the cable into place. See letter "D" in the figure.
14
A

Figure 12. Installing Slimline Floppy Drive into Chassis

C
B
TP01144
Intel® Server Chassis SR2400
SCSI and SATA Backplane Installation Instructions