Table of Contents
Advertisement
Left and Right I/O Board Cage Modules
The left and right I/O board cage modules share the same steps during the removal and
installation procedures. For your reference, this section takes the steps of removing and
installing the left I/O board cage module as an example.
The location of the left and right I/O board cage modules on the server chassis is shown in
the following figures:
Note: Before you remove or install the server board, complete these steps:
1. Make sure the server is not turned on or connected to the AC power. To power off
the server, see
2. Disconnect all necessary cable connections.
3. When removing and installing I/O board cage module, keep the handle of the
power supply in the horizontal direction to avoid damage on it.
®
Intel
Server System SR1680MV Service Guide
Figure 25. Left I/O Board Cage Module Location
Figure 26. Right I/O Board Cage Module Location
"Power
Off".
25
Advertisement
Table of Contents
