Table of Contents
Advertisement
Key
ESC
Exit
Select Item
Select Item
Select Menu
Tab
Select Field
-
Change Value
+
Change Value
F9
Load Optimal Defaults
®
Intel
Server System SR1680MV Service Guide
Table 6. Keyboard Command Bar Description
Option
The ESC key provides a mechanism for backing out of any field.
This key will undo the pressing of the Enter key. When the ESC
key is pressed while editing any field or selecting features of a
menu, the parent menu is re-entered.
When the ESC key is pressed in any sub-menu, the parent menu
is re-entered. When the ESC key is pressed in any major menu,
the exit confirmation window is displayed and the user is asked
whether changes can be discarded. If "No" is selected and the
Enter key is pressed, or if the ESC key is pressed, the user is
returned to where they were before ESC was pressed without
affecting any existing settings. If "Yes" is selected and the Enter
key is pressed, Setup is exited and the BIOS continues with
POST.
The up arrow is used to select the previous value in a pick list, or
the previous options in a menu item's option list. The selected
item must then be activated by pressing the Enter key.
The down arrow is used to select the next value in a menu item's
option list, or a value field's pick list. The selected item must then
be activated by pressing the Enter key.
The left and right arrow keys are used to move between the
major menu pages. The keys have no affect if a sub-menu or pick
list is displayed.
The Tab key is used to move between fields. For example, Tab
can be used to move from hours to minutes in the time item in the
main menu.
The minus key on the keypad is used to change the value of the
current item to the previous value. This key scrolls through the
values in the associated pick list without displaying the full list.
The plus key on the keypad is used to change the value of the
current menu item to the next value. This key scrolls through the
values in the associated pick list without displaying the full list. On
106-key Japanese keyboards, the plus key has a different scan
code than the plus key on the other keyboard, but will have the
same effect.
Pressing F9 causes the following to display:
Setup Confirmation
Load Optimal Defaults?
[OK]
If "OK" is selected and the Enter key is pressed, all Setup fields
are set to their default values. If "Cancel" is selected and the
Enter key is pressed, or if the ESC key is pressed, the user is
returned to where they were before F9 was pressed without
affecting any existing field values.
Description
[Cancel]
61
Advertisement
Table of Contents
