Installing A Pci-E Cage; Daughter Cards (Optional); Figure 45. Securing The Slot Cover; Figure 46. Removing The Riser Card - Intel SR1680MV - Server System - 0 MB RAM Service Manual

6. Loosen and remove the two securing screws as shown in
7. Pull the riser card out from the PCI-E cage along the direction of the arrow.

Installing a PCI-E Cage

Reverse the

Daughter Cards (Optional)

There are two optional daughter cards supported by each IO board. The 10 GB IO card
and the InfiniBand card share the same removal and installation procedure. For your
reference, this section takes the steps of removing and installing 10GB IO card as
example.
Figure 47 shows the location of the 10 GB IO card.
38

Figure 45. Securing the Slot Cover

Figure 46. Removing the Riser Card

"Removing a PCI-E Cage" steps to install the PCI-E cage.
®
Intel Server System SR1680MV Service Guide
Figure 46.