Before Installing Intel ® I/O Expansion Module At The Left Edge Of The Board (Optional); Installing Intel I/O Expansion Module; Figure 60. Installing Intel ® I/O Expansion Module - Intel R200LH2 Service Manual

5. Remove the air duct. For instructions, see
Before Installing Intel
Board (Optional)
1. Install the module to the provided bracket (see letter A).
2. Secure the module to the bracket with the three screws (see letter B).
3. Install the provided connector converter (see letter C).
Installing Intel I/O Expansion Module
®
1. Remove the screw securing the filler panel from the chassis and remove the filler panel (see
letter A).
2. Position the module over the server board, fit the front of the module into the back panel slot
(see letter B).
3. Attach the module to the server board connector (see letter C).
4. Secure the module with the two screws as shown (see letter D).
®
Intel Server System R2000LH2/LT2 Service Guide
Removing the Air
I/O Expansion Module at the Left Edge of the
®
®
Figure 60. Installing Intel
Hardware Installations and Upgrades
Duct.
I/O Expansion Module
37