Removing A Dimm; Installing A Dimm; Figure 19. Lifting The Dimm Out Of The Socket - Intel SR1680MV - Server System - 0 MB RAM Service Manual

Before you remove or install any DIMMs, complete the following steps:
1. Make sure the server is not turned on or connected to the AC power. To power off
the server, see
2. Remove the chassis cover. To remove the cover, see

Removing a DIMM

1. Unlock a DIMM socket by pressing the retaining clips outward. This action
releases the module and partially lifts it out of the socket.
2. Lift out the DIMM.

Installing a DIMM

1. Unlock a DIMM socket by pressing the retaining clips outward.
®
Intel Server System SR1680MV Service Guide
"Power Off".

Figure 19. Lifting the DIMM Out of the Socket

"Mid-Top Cover".
21