Installing The System Cover; Figure 16. Removing The Server System Cover; Figure 17. Installing The Server System Cover - Intel SR1560SF - Server System - 0 MB RAM Service Manual
Server system
Hide thumbs
Also See for SR1560SF - Server System - 0 MB RAM:
- Hardware installation manual (16 pages) ,
- Service manual (158 pages)
Table of Contents
Advertisement
Note: A nonskid surface or a stop behind the server system may be needed to prevent the server
system from sliding on your work surface.
1. Remove the top cover screw (see letter "A").
2. Slide the cover back until it stops and lift the cover upward to remove it (see letter
"B").
Installing the System Cover
Place the cover over the server system so that the side edges of the cover sit just inside the
server system sidewalls.
1. Slide the cover forward until it clicks into place (see letter "A").
2. Insert the screw at the center of the top cover (see letter "B").
®
Intel
Server System SR1560SF Service Guide
Figure 16. Removing the Server System Cover
Figure 17. Installing the Server System Cover
B
A
AF002371
A
B
AF002370
23
Advertisement
Table of Contents
Need help?
Do you have a question about the SR1560SF - Server System - 0 MB RAM and is the answer not in the manual?