Removing A Slimline Optical Drive; Figure 37. Installing An Optical Drive Assembly Into The Server System; Figure 38. Removing The Slimline Optical Drive Assembly From The Server System - Intel SR1560SF - Server System - 0 MB RAM Service Manual
Server system
Hide thumbs
Also See for SR1560SF - Server System - 0 MB RAM:
- Hardware installation manual (16 pages) ,
- Service manual (158 pages)
Table of Contents
Advertisement
6. Insert the optical drive tray assembly into the server system as shown in the figure
below.
Figure 37. Installing an Optical Drive Assembly into the Server System
7. Verify that the blue release lever on the tray locks into place.
8. Obtain the cable from the hardware box and install the cable to the interposer board
and the server board.
Removing a Slimline Optical Drive
1. Press the blue release lever (see letter "A") to unlock the optical drive tray and
remove the slimline optical drive tray assembly from the server system (see letter
"B").
Figure 38. Removing the Slimline Optical Drive Assembly from the Server
®
Intel
Server System SR1560SF Service Guide
A
B
System
AF000355
AF000384
37
Advertisement
Table of Contents
Need help?
Do you have a question about the SR1560SF - Server System - 0 MB RAM and is the answer not in the manual?