Removing And Installing The System Cover; Removing The System Cover; Figure 31. Installing The Badge To The Front Bezel; Figure 32. Removing The Badge From The Front Bezel - Intel R2000BB Series Service Manual

Hardware Installations and Upgrades
To remove the badge from the bezel, squeeze the hooks at the rear of the badge to release the badge
(see letter "A") and then remove the badge from the bezel (see letter "B").

Removing and Installing the System Cover

Removing the System Cover

The server system must be operated with the system cover in place to ensure proper cooling. You will
need to remove the top cover to add or replace components inside of the server. Before removing the
top cover, power down the server and unplug all peripheral devices and the power cable(s).
Note: A non-skid surface or a stop behind the server system may be needed to prevent the server
system from sliding on your work surface.
26

Figure 31. Installing the badge to the front bezel

Figure 32. Removing the badge from the front bezel

®
Intel Server System R2000BB Service Guide