Table of Contents
Advertisement
To remove the badge from the bezel, squeeze the hooks at the rear of the badge to release the badge
(see letter A) and then remove the badge from the bezel (see letter B).
Removing and Installing the System Cover
Removing the System Cover
The server system must be operated with the system cover in place to ensure proper cooling. You will
need to remove the top cover to add or replace components inside of the server. Before removing the
top cover, power down the server and unplug all peripheral devices and the power cable(s).
Note: A non-skid surface or a stop behind the server system may be needed to prevent the server
system from sliding on your work surface.
®
Intel
Server System R2000SC Service Guide
Figure 23. Installing the badge to the front bezel
Figure 24. Removing the badge from the front bezel
Hardware Installations and Upgrades
19
Advertisement
Table of Contents
