Security Settings - HP 635n - JetDirect IPv6/IPsec Print Server Administrator's Manual
Jetdirect print servers
Hide thumbs
Also See for 635n - JetDirect IPv6/IPsec Print Server:
- Administrator's manual (194 pages) ,
- How to use manual (101 pages) ,
- Manuallines (33 pages)
Table of Contents
Advertisement
Figure 8-2 HP Jetdirect Security Page
The parameters in each section of the Security page are described below.
Security Settings
This section on the Security page provides similar information that is located on the standard HP
Jetdirect configuration page. See the table below.
Table 8-14 Security Settings
Message
802.1X
IPsec
ENWW
Messages
Description
Identifies whether the print server has been configured with EAP/802.1X client
authentication settings.
EAP-TLS: 802.1X EAP-TLS has been configured.
EAP-PEAP: 802.1X EAP-PEAP has been configured.
Specified: An 802.1X authentication protocol other than EAP-TLS/EAP-PEAP has been
configured.
Not
Specified: 802.1X authentication has not been configured.
Provides the print server's current IPsec status.
Enabled: IPsec is enabled and operating as configured by the user.
HP Jetdirect Security Page 147
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the 635n - JetDirect IPv6/IPsec Print Server and is the answer not in the manual?