Network Statistics; Tcp/Ip Protocol Information - HP 635n - JetDirect IPv6/IPsec Print Server Administrator's Manual

Table 8-4 Security Settings (continued)
Message
Access List
Secure Web

Network Statistics

Information in this section of the Jetdirect configuration page is described in
on page 133.
Table 8-5 Network Statistics
Message
TOTAL PACKETS RECEIVED
UNICAST PACKETS RECEIVED
BAD PACKETS RECEIVED
FRAMING ERRORS RECEIVED
TOTAL PACKETS TRANSMITTED
UNSENDABLE PACKETS
TRANSMIT COLLISIONS
TRANSMIT LATE COLLISIONS

TCP/IP Protocol Information

Information in this section of the Jetdirect configuration page is described below. For general TCP/IP
configuration parameters, see
parameters, see
on page 136. For error messages, see
ENWW
Description
Specified: A user-specified SNMP set community has been set.
(IPv4 only) Identifies whether a host access control list is configured on the HP Jetdirect
print server. A host access control list specifies the IP address of individual systems, or
IP network of systems, that are allowed access to the print server and device.
Specified: A host access list is configured on the HP Jetdirect print server.
Not Specified: A host access list is not configured on the print server. All systems are
allowed access.
Specifies the use of encrypted communications between a browser and the HP Jetdirect
embedded Web server.
Optional
ports, as well as encrypted communications using HTTPS (secure HTTP).
HTTPS Required: Only encrypted communications on HTTPS is allowed.
Description
Total number of frames (packets) received by the HP Jetdirect print server without error.
This includes broadcast, multicast packets, and packets specifically addressed to the
print server. This number does not include packets specifically addressed to other
nodes.
Number of frames specifically addressed to this HP Jetdirect print server. This does not
include broadcasts or multicasts.
Total number of frames (packets) received with errors by the HP Jetdirect print server.
Maximum of CRC (Cyclic Redundancy Check) errors and framing errors. CRC errors
are frames received with CRC errors. Framing errors are frames received with
alignment errors. A large number of framing errors could indicate a cabling problem with
your network.
Total number of frames (packets) transmitted without error.
Total number of frames (packets) not successfully transmitted because of errors.
Number of frames not transmitted because of repeated collisions.
Total number of frames not transmitted because a late collision occurred. Late collisions
often occur when cable lengths exceed network specifications. A large number may
indicate a cabling problem on the network.
Table 8-6 TCP/IP Configuration Information on page
Table 8-7 IPv4 Section on page
(HTTPS/HTTP): Allows unencrypted communications using standard HTTP
134. For IPv6 parameters, see
Table 8-13 Error Messages on page
Table 8-5 Network Statistics
134. For IPv4
Table 8-8 IPv6 Section
140.
HP Jetdirect Configuration Page 133