Ipv4 Section - HP 635n - JetDirect IPv6/IPsec Print Server Administrator's Manual

Table 8-6 TCP/IP
Message
IPv4
and
IPv6
HOST NAME
IPV4 DOMAIN NAME
IPV6 DOMAIN NAME
PRIMARY DNS SERVER
SECONDARY DNS SERVER
DNS (IPV6)
WINS SERVER
IDLE TIMEOUT

IPv4 Section

The following table includes items displayed under the IPv4 section of the configuration page.
Table 8-7 IPv4
Message
STATUS
134 Chapter 8 HP Jetdirect Configuration Pages
Configuration Information
Description
Provides current status of IPv4 and IPv6 protocols on the print server:
Enabled: the protocol is turned on.
Disabled: the protocol is turned off.
The host name configured on the print server. It may be truncated.
Not Specified: Indicates that no host name was specified in a BOOTP response or TFTP
configuration file.
NPIxxxxxx: The default name is NPIxxxxxx, where xxxxxx represents the last six digits
of the LAN hardware (MAC) address.
The Domain Name System (DNS) name of the IPv4 domain in which the HP Jetdirect
print server resides (for example, support.company.com). It is not the fully qualified DNS
name (for example, printer1.support.company.com) because the host printer name is
not included.
Not Specified: Indicates that a domain name has not been configured on the print server.
The Domain Name System (DNS) name of the IPv6 domain in which the HP Jetdirect
print server resides (for example, support.company.com). It is not the fully qualified DNS
name (for example, printer1.support.company.com) because the host printer name is
not included.
Not Specified: Indicates that a domain name has not been configured on the print server.
The IPv4 address of the Domain Name System (DNS) server.
Not Specified: Indicates that a primary DNS server has not been configured on the print
server.
The IPv4 address of the Domain Name System (DNS) server.
Not Specified: Indicates that a secondary DNS server has not been configured on the
print server.
The IPv6 address of one or more Domain Name System (DNS) servers.
Not Specified: Indicates that an IPv6 DNS server has not been configured on the print
server.
The IP address of the Windows Internet Naming Service (WINS) server.
Not Specified: Indicates that a WINS server's IP address has not been detected or
configured.
The timeout value expressed in seconds after which the print server closes an idle TCP
print data connection. Acceptable values are integers between 0 and 3600. A value of
zero turns off the timeout mechanism. The default value is 270 seconds.
Section
Description
Current TCP/IPv4 status.
ENWW