Create Address Template; Step 2: Specify Service Template; Create Service Template - HP 635n - JetDirect IPv6/IPsec Print Server Administrator's Manual

After an address template has been selected, click Next.

Create Address Template

Items on the Create Address Template page are described below.
Table 5-3 Create Address Template page
Item
Address Template Name
Local Address
Remote Address

Step 2: Specify Service Template

The available service templates for which a rule will apply are listed in the Service Templates field by
name. Select a predefined template, or click New to create and add a custom template to the list.
CAUTION:
Future networking applications that are deployed after the IPsec Policy is in place may not be
IPsec-protected unless the All Services template is used.
To view or delete a template in the list, select it and click View or Delete (you may not be able to delete
some predefined templates).
After a service template has been selected, click Next.

Create Service Template

Items on the Create Service Template page are described below.
Table 5-4 Create Service Template page
Item
Service Template Name
ENWW
Description
Enter a name for a custom address template in the edit box. This name will be added
to the Specify Address Template page.
NOTE:
Under Local Address, select or specify the IP addresses for which this rule will apply.
Local addresses identify the addresses assigned to the Jetdirect print server.
Unique IP address ranges can be specified directly or through a prefix. These may be
used, for example, when DHCP servers assign IP addresses from a scope of addresses,
Under Remote Address, select or specify the IP addresses for which this rule will apply.
Remote addresses identify the addresses associated with remote hosts.
Unique IP address ranges can be specified directly or through a prefix. These may be
used, for example, when DHCP servers assign IP addresses from a scope of addresses,
If the All Services template for a rule is not specified, a security risk may exist.
Description
Enter a name for a custom service policy template in the edit box. This name will be
added to the list of available services on the Specify Service Template page.
NOTE:
The address template name must be unique.
The service template name must be unique.
HP Jetdirect IPsec/Firewall Wizard 103