Device Tabs; Networking Tab - HP 635n - JetDirect IPv6/IPsec Print Server Administrator's Manual

Table 4-1 HP Jetdirect Home Page Items (continued)
Item
Host Name
System Up Time
System Contact
System Location
HP Jetdirect product
Firmware Version
IP Address
Hardware Address
LAA
Admin Password

Device Tabs

In place of the Home tab, various device tabs may appear if the attached network device also contains
a supported embedded Web server. Device tabs provide access to embedded Web pages served by
the device. For information on Device tab features, see the embedded Web server guide for the device.
This guide is supplied with HP LaserJet printers/MFPs that support an embedded Web server.

Networking Tab

The Networking tab provides access to HP Jetdirect network configuration parameters and status. At
the top of the page, the printer/MFP model, host name, and IP address are displayed. These items are
persistent on all network configuration pages. The menu items in the left margin provide access to
configuration and status pages, and are listed below.
ENWW
Description
To display supported non-English languages, the use of cookies must be enabled in your
browser settings.
Specifies the IP host name assigned to the device and stored on the HP Jetdirect print
server. The default host name is NPIxxxxxx, where xxxxxx are the last six digits of the LAN
hardware (MAC) address. See TCP/IP on the
The length of time since either the HP Jetdirect print server or the network device was last
powered off/on.
A text string (stored on the HP Jetdirect print server) for the name of a person to contact
for this device. See TCP/IP on the
A text string (stored on the HP Jetdirect print server) that identifies the physical location of
this device. See the Networking TCP/IP configuration pages.
The product number of the HP Jetdirect print server (for example HP J7982E).
The version of the operating instructions installed on the HP Jetdirect print server.
The Internet Protocol address configured on the HP Jetdirect print server.
The LAN hardware (or MAC, Media Access Control) address of the HP Jetdirect print
server. This unique address is assigned by Hewlett-Packard, but can be locally
administered.
A Locally Administered Address (LAA) that replaces the LAN Hardware (MAC) address.
The LAA may be configured under local control by a network administrator. By default, the
LAA is the factory-assigned LAN Hardware address.
Specifies whether or not an administrator password has been set. This password may also
be configured through a Telnet session with the HP Jetdirect print server, or from HP Web
Jetadmin.
Because passwords are synchronized with selected printers, the password may have also
been set through printer security Web pages.
Use the Admin Password page to set or clear administrator passwords.
If an administrator password has been set, you will be prompted for a User Name and
Password to access network parameters. For more information, click Help, or see the
Admin. Account on page 86
Networking Tab on page
Networking Tab on page
section in this guide.
65.
65.
Networking Tab 65