Hp Software Supported Proxies; Microsoft Supplied Software; Windows 2000/Xp/Server 2003 Integrated Software; Novell Supplied Software - HP 635n - JetDirect IPv6/IPsec Print Server Administrator's Manual

HP Software Supported Proxies

Web proxy with support for HTTP v1.1 or greater (may not be needed if printing over an intranet).

Microsoft Supplied Software

NOTE:

Windows 2000/XP/Server 2003 Integrated Software

On Windows 2000/XP/Server 2003 systems, an alternative to using the HP supplied software is to use
the IPP-client software integrated with the Windows system. The IPP implementation on the HP Jetdirect
print server is compatible with the Windows system IPP-client software.
To set up a print path to an HP Jetdirect-connected Internet printer using the Windows 2000/XP IPP-
client software, proceed as follows:
1. Open the Printers folder (click Start, select Settings, and select Printers).
2. Run the Add Printer wizard (double-click Add Printer), then click Next.
3. Select the option for a Network printer and click Next.
4. Select Connect to a printer on the Internet and enter the print server's URL:
http:// <IP_address> [/ipp/port#]
where <IP_address> is the IPv4 address configured on the HP Jetdirect print server. [/ipp/
port#] identifies the port number, which is port 1 for single-port print servers (default is /ipp/port1).
Example:
http://192.160.45.40
Click Next.
5. You will be prompted for a printer driver (the HP Jetdirect print server does not contain printer
drivers, so your system cannot automatically obtain the driver). Click OK to install the printer driver
onto your system and follow the instructions on the screen. (You may need your printer CD-ROM
to install the driver.)
6. To complete the print path setup, follow the instructions on the screen.

Novell Supplied Software

The HP Jetdirect print server is compatible with IPP running on NetWare 5.1 with SP1 or later. For
NetWare client support, refer to your NetWare technical documentation or contact Novell.
ENWW
Contact Microsoft for support of Windows IPP software.
An IPP connection to an HP Jetdirect print server with IPv4 address 192.160.45.40. ("/
ipp/port1" is assumed and not required.)
NOTE: For a Secure IPP connection, replace http:// with https:// in the URL string
above.
Internet Printer Connection Software 13