HP 635n - JetDirect IPv6/IPsec Print Server Administrator's Manual page 39

Table 3-2 TFTP Configuration File Parameters (continued)
2: Disable forced redirection to HTTPS. Both HTTP and HTTPS communications can be used.
security-reset:
Reset security settings on the print server to factory default values. 0 (default) does not reset, 1 resets the security
settings.
TCP/IP Main
host-name:
Specifies the node name that will appear on the Jetdirect configuration page. Default is NPIxxxxxx, where xxxxxx is the
last six digits of the LAN hardware address.
parm-file:
Specifies the path and file name whose contents are sent to the printer for printing each time the print server is powered
on. The path and filename entry is limited to 64 alphanumeric characters.
domain-name:
The domain name for the device (for example, support.hp.com). It does not include the host name; it is not the Fully
Qualified Domain Name (such as printer1.support.hp.com).
pri-dns-svr:
The IP address of the DNS (Domain Name System) server.
sec-dns-svr:
The IP address of a secondary DNS server to use if the primary DNS server is unavailable.
pri-wins-svr:
The IP address of the primary Windows Internet Naming Service (WINS) server.
sec-wins-svr:
The IP address of the secondary Windows Internet Naming Service (WINS) server.
TCP/IP Print Options
9100-printing:
Enables or disables printing to TCP port 9100 on the print server. 0 disables, 1 (default) enables.
ftp-printing:
Enables or disables the ability to print through FTP: 0 disables, 1 (default) enables.
ipp-printing:
Enables or disables the ability to print through IPP: 0 disables, 1 (default) enables.
lpd-printing:
Enables or disables LPD (Line Printer Daemon) printing services on the Jetdirect print server. 0 disables, 1 (default)
enables.
banner:
A port-specific parameter that specifies printing an LPD banner page. 0 disables banner pages. 1 (default) enables banner
pages.
ENWW
(or sys-name:, name:)
(or dns-srv:)
(or pri-wins-srv:)
(or sec-wins-srv:)
(or 9100-config:)
(or ftp-config:, ftp:)
(or ipp-config:, ipp:)
(or lpd-config:, lpd:)
IPv4 Configuration 29