EPSON Stylus PHOTO 2100/2200
"
When reinstalling the PF Roller Support, hitch the two upper
hooks on the projections of the Under Frame, and insert the two
lower hooks into the notches.
Refer to Figure 4-137, "Removing the PF Roller Support".
"
Place the Under Driven Roller on the joggle of the PF Roller
Support in advance.
Refer to Figure 4-137, "Removing the PF Roller Support".
DISASSEMBLY AND ASSEMBLY
4.2.18 Disassembling the Cutter Unit
4.2.18.1 Removing the Cutter Sensor
1.
Remove the two screws 15) C.B.S 3
(9±1kgf.cm) and two screws (T.B.D) that secure the Cutter Housing.
2.
Release the three hooks located on the Cutter Unit bottom.
C.B.S 3x8
Cutter
Housing
C.B.S 3x6
Figure 4-138. Screws That Secure the Cutter Housing
Disassembly
Revision B
×
8 (9±1kgf.cm), two screws 6) C.B.S 3
Screws T.B.D
Hooks
×
6
182