Epson 2200 - Stylus Photo Color Inkjet Printer Service Manual page 151

EPSON Stylus PHOTO 2100/2200
6. Lift the right end of the Carriage Guide Shaft B as seen from the printer front,
remove the Sub Shaft Fixing Plate (Right) from the hook of the Right Frame, and
turn the Sub Shaft Fixing Plate (Right) to remove it from the Carriage Guide Shaft
B.
Sub Shaft Fixing Plate (Right)
Hook
Figure 4-69. Removing the Sub Shaft Fixing Plate (Right)
When reinstalling the Sub Shaft Fixing Plate to the Carriage Guide
Shaft B, insert the leg of the Carriage Guide Shaft B in the
direction shown in Figure 4-70 and then turn it.
Figure 4-70. Reinstalling the Sub Shaft Fixing Plate
DISASSEMBLY AND ASSEMBLY
Carriage Guide
Shaft B
Sub Shaft
Fixing Plate
Carriage
Guide Shaft
B
7. Slide the Carriage Guide Shaft B to the right as seen from the printer front, then
remove the left end from the Frame, and remove the Carriage Guide Shaft B to the
diagonal top left of the Printer Mechanism.
"
When removing the Carriage Guide Shaft B, fully take care not
to scratch it.
Refer to Figure 4-69, "Removing the Sub Shaft Fixing Plate
(Right)".
"
Removing the Carriage Guide Shaft B brings the Carriage Unit
into contact with the Front Paper Guide. Therefore, when the
Printhead is installed on the Carriage Unit, remove the Carriage
Shaft B after moving the Carriage Unit to the home position.
"
Make sure that the left end of the Carriage Guide Shaft B is in
order of the Bush, Sub Shaft Fixing Plate (Left), Plain Spring
and Leaf Spring.
Refer to Figure 4-71, "Order on Left End of Carriage Guide
Shaft B".
Sub Shaft Fixing
Plate (Left)
Bush
Figure 4-71. Order on Left End of Carriage Guide Shaft B
"
After reinstalling the Carriage Guide Shaft B, always make sure
that the Sub Shaft Fixing Plate is mounted correctly.
Refer to Figure 4-69, "Removing the Sub Shaft Fixing Plate
(Right)".
Disassembly
Revision B
Leaf
Spring×2
Plain Spring
151