Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Epson Manuals
  4. Printer
  5. StylusRIP Professional (Stylus Photo 2200
  6. Product support bulletin

Epson Stylus Photo 2200 Product Support Bulletin

Epson stylus photo 2200: support bulletin
Hide thumbs Also See for Stylus Photo 2200:

Advertisement

Quick Links

Download this manual See also: Service Manual, Reference Manual
EPSON
Date:
04/23/2003
PSB #:
PSB.2003.05.007
Reference:
N/A
Product(s):
Epson Stylus Photo 2200 printer and 802.11b Wireless Print Server
Subject:
Stylus Photo 2200 printer not available in OS X Print Center
This bulletin was created to inform you of a firmware update required for the EpsonNet 802.11b
Wireless Print Server.
Reasons:
If any existing OS X system is updated to version 10.2.3, the Epson Stylus Photo 2200 printer
cannot be found in the Apple Print Center.
Recommendations:
Verify the current version of the firmware on the Print Server. If the version is 3.96 or lower,
update the firmware to 3.99 using the instructions listed below.
How to verify the firmware version:
Print a status sheet from the print server. On the third line of the status sheet the firmware
version will be listed as follows:
FW Ver. WLES-3.96 (2002.06.05)
File location:
The firmware update file, epson10651.sea.hqx, and this bulletin are posted on the
Epson website; http://www.epson.com.
P
S
RODUCT
UPPORT
Page 1 of 2
B
ULLETIN
Authorization:
Originator: JAM
Total Pages: 2

Advertisement

loading

Related Manuals for Epson Stylus Photo 2200

Summary of Contents for Epson Stylus Photo 2200

  • Page 1 This bulletin was created to inform you of a firmware update required for the EpsonNet 802.11b Wireless Print Server. Reasons: If any existing OS X system is updated to version 10.2.3, the Epson Stylus Photo 2200 printer cannot be found in the Apple Print Center. Recommendations: Verify the current version of the firmware on the Print Server.
  • Page 2 Finish the print server configuration, then Quit WP-ADMIN. Search for the printer: Once the update is complete, open the Print Center. Select ADD Printer and choose Epson AppleTalk. This will allow you to select the Stylus Photo 2200 printer. Page 2 of 2...
  • Page 3 This bulletin was created to inform you of a firmware update required for the EpsonNet 802.11b Wireless Print Server. Reasons: If any existing OS X system is updated to version 10.2.3, the Epson Stylus Photo 2200 printer cannot be found in the Apple Print Center. Recommendations: Verify the current version of the firmware on the Print Server.
  • Page 4 Finish the print server configuration, then Quit WP-ADMIN. Search for the printer: Once the update is complete, open the Print Center. Select ADD Printer and choose Epson AppleTalk. This will allow you to select the Stylus Photo 2200 printer. Page 2 of 2...
  • Page 5 EPSON RODUCT UPPORT ULLETIN 4/30/2003 Originator: DS Date: PSB #: PSB.2003.05.005 Authorization: Reference: Total Pages: 6 EpsonNet 802.11b Wireless Print Server Product(s): OS X Procedure for Updating the Firmware Subject: This bulletin was created to inform you of the procedural steps used to update the EpsonNet 802.11b Wireless Print Server firmware using the OS X Terminal Utility.
  • Page 6 TYPE: tftp <enter the IP address of the print server> then press RETURN Example: tftp 139.63.2.150, then press the RETURN key. Page 2 of 6...
  • Page 7 At the tftp> prompt type the word binary, then press RETURN Example: tftp> binary, then press the RETURN key. Page 3 of 6...
  • Page 8 At the tftp> prompt type put <WLEP399.bin file name> then press RETURN Example: tftp> put WLEP399.bin, then press the RETURN key. Page 4 of 6...
  • Page 9 During the update process, you will see a message on the screen at the TFTP prompt that a number of bytes were sent. This means the update is complete. Note: If a timeout error occurs do the following: Check your TCP/IP settings Cycle the power of the print server Run WP-Admin, click CLEAR then click START Check the TCP/IP settings in the Configuration page of the print server, save the settings then...
  • Page 10 7. Open the configuration page and confirm the settings are correct, change if necessary. 8. Print the Configuration page. Click on the WP-Admin drop down menu at the top of the page and select TEST PAGE or PRINT. 9. Save, then Quit WP-Admin. Page 6 of 6...