Epson 2200 - Stylus Photo Color Inkjet Printer Service Manual page 109

EPSON Stylus PHOTO 2100/2200
Print Quality State Phenomenon Detail
Ink stain of paper Ink stain occurs at the back or end
of the print paper.
Ink sticks to other than the print
area of the paper, resulting in
contamination.
TROUBLESHOOTING
Table 3-18. Print Quality Fault Check Points
Faulty Part/
Part Name
Front paper guide 1. Check that heaps of ink are not formed on the Ink pads and that
ink pads the Ink pads are installed securely and evenly in the setting
position.
Paper eject unit 1. Check the Star wheel rollers for ink stain.
Front paper guide 1. Check the Front paper guide for ink stain.
Front paper guide
Front paper guide 1. Check for the formation of ink heaps.
(Ink pads)
Troubleshooting
Check Point
Revision B
Remedy
1. If heaps of ink are formed, replace the Ink
pads. At this time, if the ink has solidified in
the Ink pad setting section of the Front paper
guide, it can cause the Ink pads to rise. After
removing the ink, therefore, install new Ink
pads. If it has been confirmed that the Ink pads
have risen, reinstall the Ink pads correctly.
1. Clean the Star wheel rollers with a soft cloth.
1. Clean the Front paper guide with a soft cloth
carefully.
1. Change the Front paper guide (Ink pads) for a
new one.
109