Epson 2200 - Stylus Photo Color Inkjet Printer Service Manual page 137

EPSON Stylus PHOTO 2100/2200
13. Remove the Extension Spring 0.088 hitched on the Left Lever Hopper Cam as
viewed from the ASF Unit front, and remove the Left Lever Hopper Cam from the
ASF Frame.
Left Lever
Hopper Cam
Figure 4-34. Removing the Left Lever Hopper Cam
When removing the Extension Spring 0.088, fully exercise care not
to lose it.
Refer to Figure 4-34, "Removing the Left Lever Hopper Cam".
DISASSEMBLY AND ASSEMBLY
14. Slide the Left Hopper Cam to the left as seen from the ASF Unit front to remove
15. Pull and remove the LD Roller Shaft to the left as viewed from the ASF Unit front.
Extension
Spring 0.088
Disassembly
the Left Hopper Cam from the LD Roller Shaft.
Left Hopper Cam LD Roller Shaft
Figure 4-35. Removing the LD Roller Shaft
Do not touch the LD Roller surface with bare hands.
Refer to Figure 4-35, "Removing the LD Roller Shaft".
Revision B
LD Roller surface
137