Epson 2200 - Stylus Photo Color Inkjet Printer Service Manual page 150

EPSON Stylus PHOTO 2100/2200
PG Change Link
Figure 4-66. Removing the PG Change Link
4. Release the hook of the PG Change Bush from the Carriage Guide Shaft B, and
remove the PG Change Bush and PG Change Link together from the Carriage
Guide Shaft B.
PG Change
Bush
Carriage Guide
Shaft B
Figure 4-67. Removing the PG Change Bush and PG Change Link
DISASSEMBLY AND ASSEMBLY
PG Change
Lever
Cutout and cutout
support
Hook
Disassembly
Since the hook of the PG Change Bush is easily damaged, handle it
very carefully.
Refer to Figure 4-67, "Removing the PG Change Bush and PG
Change Link".
5. Remove the one screw 9) C.B.S (P4) 3
Adjust Parallelism Bush, and while slightly pulling the bottom side (tooth surface)
of the Sub Right Adjust Parallelism Bush to the front as viewed from the printer
right side, turn it counterclockwise to release the two hooks, and then remove the
Sub Right Adjust Parallelism Bush from the Right Frame.
Hooks
Figure 4-68. Removing the Sub Right Adjust Parallelism Bush
Revision B
×
6 (6±1kgf.cm) that secures the Sub Right
Sub Right Adjust
Parallelism Bush
C.B.S(P4)3×6
150