Epson 2200 - Stylus Photo Color Inkjet Printer Service Manual page 83

EPSON Stylus PHOTO 2100/2200
Occurrence Timing Phenomenon Detail
At operation When the Paper switch was
pressed, the LD rollers attempt to
feed paper but the paper is not
fed.
TROUBLESHOOTING
Table 3-5. Phenomenon-Based Paper Out Error Check Points
Faulty Part/
Part Name
ASF unit 1. Check the Paper feed mechanism of the ASF unit for paper dust
or foreign matter.
Troubleshooting
Check Point
Revision B
Remedy
1. Using a cleaning sheet, clean the Paper feed
mechanism and Paper eject mechanism.
The procedure is as follows.
1 Place the cleaning sheet upside down
and put it into the ASF unit.
2 Press the Paper switch to start paper
feed.
3 Repeat the above steps several times.
* To remove persistent contamination,
staple an alcohol-dampened cloth to a
postcard and clean the rollers in the
following method.
Postcard used
Cleaning sheet
as mount
Non-adhesive part
Adhesive
part
Stapling
This side down
Cloth damped
with alcohol
1 Place the alcohol-dampened cloth
toward the LD roller surface of the ASF.
2 Hold the mount top end securely and
press the Paper feed switch.
3 Repeat the paper feed sequence several
times to clean the LD roller surface of
the ASF.
83