Tools To Be Used - Epson 2200 - Stylus Photo Color Inkjet Printer Service Manual

EPSON Stylus PHOTO 2100/2200
"
When the printer model uses the HAV ink cartridges, transport
it after removing the ink cartridges. Especially for air
transportation, always remove the ink cartridges before
transportation since ink will flow into the cap via the head with
the reduction of the atmospheric pressure, causing ink leakage.
"
Use only the recommended tools for disassembly, reassembly and
adjustment. (Refer to Table 4-1"Tool List".)
"
Tighten screws to the specified torques.
"
Use the specified lubricants and adhesives.
(Refer to Chapter 6 "Maintenance".)
"
Make the necessary adjustments under the instructions given for
disassembling.
(Refer to Chapter 5 "Adjustment".)
"
When reassembling the waste ink pads and tray, always make
sure that the waste ink tube is fitted correctly in the specified
place. Fitting the ink tube in other than the specified position can
cause ink leakage.
Ink tube
Figure 4-1. Position Specified for Ink Tube
DISASSEMBLY AND ASSEMBLY
Waste ink pad

4.1.2 Tools to Be Used

The following table indicates the tools recommended for use for disassembly,
reassembly and adjustment.
Tool Name
Scale PF unit applying jig
Mounting plate scale jig
Phillips Screw Driver (No.1)
Phillips Screw Driver (No.2)
Tweezers
PG adjustment gauge set
Nippers
#
NOTE: :Available
Overview
Table 4-1. Tool List
Supplier
EPSON 1051767
EPSON 1051765
#
B743800400
#
B743800200
#
B741000100
EPSON 1113311
#
B7405001
Revision B
Code
117