Epson 2200 - Stylus Photo Color Inkjet Printer Service Manual page 76

EPSON Stylus PHOTO 2100/2200
Printer Condition
Power
Cutter Jam Error -
Cutter Position Error Off
"-" : don't care
Blink : 0.5sec on + 0.5sec off repetition
Blink 2 : 0.2sec on + 0.2sec on + 0.2sec on 0.4sec off repetition
TROUBLESHOOTING
Table 3-1. Error Indications and Fault Occurrence Causes
Indicators
Paper Ink 1-7
Blink 2 -
Blink 2 Blink 2
Error Indications and Fault Occurrence Causes
EPSON Printer Window 3
High speed Blink : 0.1sec on + 0.1sec off repetition
Blink alternately 1 : 0.5sec on + 0.5sec off repetition
Blink alternately 2 : 0.5sec on + 0.5sec on repetition
Fault Occurrence Cause
This error is detected if the paper could not be cut
properly due to overload after Cutter operation but the
Cutter could return to the home position.
This error is detected if the paper cannot be cut properly
due to overload during Cutter operation and the Cutter
cannot return to the home position.
Revision B
76