Epson 2200 - Stylus Photo Color Inkjet Printer Service Manual page 122

EPSON Stylus PHOTO 2100/2200
5. Pull the two hooks, which secure the Upper Housing and are located at bottom
front as viewed from the printer front, to the front and lift them up to release.
Figure 4-5. Hooks That Secure the Bottom Front of the Upper Housing
DISASSEMBLY AND ASSEMBLY
Hooks
Printer front bottom side
6. Slightly lift the Upper Housing, remove the FFC from the connector of the Panel
Board that is located on the bottom front right side of the Upper Housing as
viewed from the printer front, and remove the Upper Housing.
Figure 4-6. Removing the FFC
Insert the FFC into the Panel Board connector securely.
Refer to Figure 4-6, "Removing the FFC".
Disassembly
Panel Board
Connector
FFC
Revision B
122