Overview; Precautions - Epson 2200 - Stylus Photo Color Inkjet Printer Service Manual

EPSON Stylus PHOTO 2100/2200

4.1 Overview

This chapter describes procedures for disassembling and assembling this product.
Unless otherwise specified, the disassembled units or main components can be
reassembled by reversing the disassembling procedure.
• Warning
Procedures that could result in injury or loss of life, if cautions are not taken, are
described under the heading "WARNING".
• Caution
Precautions for any disassembly or assembly procedures are described under the
heading "CAUTION".
• Check Point
Tips for disassembling procedures are described under the heading "CHECK
POINT".
• Reassembly
If the assembling procedure is different from the reverse procedure of
disassembling, it is described under the heading "REASSEMBLY".
• Adjust
Any adjustments required after disassembling or assembling are described under the
heading "ADJUST".
When you need to disassemble any units or parts that are not described in this chapter,
refer to the exploded diagrams in the Appendix.
Before starting your work, always read the precautions described in the next section.
DISASSEMBLY AND ASSEMBLY

4.1.1 Precautions

Before starting the disassembling/reassembling work of this product, always read the
descriptions under the following headings "WARNING" and "CAUTION" carefully.
"
Before starting the disassembling/reassembling work of this
product, always disconnect the power cable. However, if you
cannot disconnect the power cable for voltage measurement or
like, be extremely careful not to get an electric shock and follow
the procedures in this manual to do your work.
"
Always wear goggles to protect your eyes from ink. If ink gets in
your eyes, wash your eyes with clean water and see the doctor.
"
To prevent injury from sharp metal edges, always wear gloves
for disassembly and reassembly.
"
If ink has adhered to your skin, wash it with soap and water. If it
has caused skin irritation, see the doctor.
"
To protect the microprocessors and circuitry, use static
discharge equipment, such as anti-static wrist straps, and handle
them carefully when accessing the internal components.
"
Avant de commencer, assurez vous que l'imprimante soit
eteinte et que le cordon d'alimentation soit debranche.
"
Veillez a jeter les piles usagees selon le reglement local.
Overview
Revision B
116