Epson 2200 - Stylus Photo Color Inkjet Printer Service Manual page 147

EPSON Stylus PHOTO 2100/2200
When removing the Torsion Spring 66, hitch the longer end of the
Spring on the front center side hook of the Carriage Unit and on
the left side hook of the Carriage Unit, and the shorter end on the
Head Fastener.
Refer to Figure 4-59, "Reinstalling the Torsion Spring 66".
Hook
Figure 4-59. Reinstalling the Torsion Spring 66
8. Lift the two overlapping Sus-Plates with pliers or like, and remove them from the
Carriage Unit.
Sus-Plate
Figure 4-60. Removing the Sus-Plates
DISASSEMBLY AND ASSEMBLY
9. Slide the Head Fastener to the left as viewed from the printer front, pull the right
end to the diagonal top right of the Carriage Unit, and remove the Head Fastener.
10. Slide the Printhead to the front as seen from the printer front, and remove and lift it
from the two hooks of the Carriage Unit.
Hook
11. Remove the two Head FFC Guides from the Printhead, and remove the Printhead.
Disassembly
Hooks
Figure 4-61. Removing the Head Fastener
Head FFC Guides
Figure 4-62. Removing the Printhead
Revision B
Printhead
Head Fastener
147