Epson 2200 - Stylus Photo Color Inkjet Printer Service Manual page 170

EPSON Stylus PHOTO 2100/2200
4.2.13.2 Removing the PF Motor
1. Remove the Printer Mechanism. (Refer to 4.2.1.4.)
2. Remove the Paper Guide Manual. (Refer to Steps 2 and 3 in 4.2.13.1.)
3. Disconnect the Connector Cable (CN16) of the PF Motor from the Main Board.
(Refer to Steps 2 and 3 in 4.2.2.2.)
4. Release the two hooks that secure the Harness Clamp to the Under Frame, and
remove the Harness Clamp from the Under Frame.
5. Release the Cable of the PF Motor from the Tie Wrap.
Hooks
Harness Clamp
Figure 4-110. Releasing the PF Motor Cable
DISASSEMBLY AND ASSEMBLY
6. Remove the two screws 13) C.P.S 3
remove the PF Motor from the Left Frame.
When removing only the PF Motor, peel the PF Scale carefully (using care not to
whiten it) and remove the PF Motor, since there are the Spur Gear 76 and PF
Scale.
Tie Wrap
Spur Gear 76
Disassembly
×
6 (6±1kgf.cm) that secure the PF Motor, and
Fully be careful not to damage (whiten or break) the Spur Gear 76
tooth surface and PF Scale.
Refer to Figure 4-111, "Removing the PF Motor".
C.P.S 3×6
PF Scale
Figure 4-111. Removing the PF Motor
Revision B
PF Motor
Frame left side
170