Download Print this page

Epson 2200 - Stylus Photo Color Inkjet Printer Product Support Bulletin

Product support bulletin(s)
Hide thumbs Also See for 2200 - Stylus Photo Color Inkjet Printer:

Advertisement

EPSON
P
03/18/2004
Date:
PSB #:
PSB.2004.04.004
N/A
Reference:
Stylus Photo 2200/R300/R300M/R800/RX500/RX600, and the Stylus CX6400
Product(s):
Subject:
Windows XP warning message for HI-SPEED USB (USB 2.0) Devices
This bulletin was created to inform you of a Windows XP warning message that comes up when an
EPSON HI-SPEED USB (USB 2.0) Printer or All-in-One device is connected to a non-HI-SPEED
USB (USB 1.1) Port. The message is only an indication that Windows XP recognizes a USB 2.0
device is connected to a USB 1.1 port. This warning message appears the first time the printer is
connected to the computer, and every time the printer is powered on. It is NOT an error message.
The message cannot be disabled, but you can close it by clicking on the "X" as shown in the red box
below.
If you click anywhere in the message box, you will see the screen below:
Click on the "Close" button to close the window.
S
RODUCT
UPPORT
B
ULLETIN
Page 1 of 1
PSB.2004.04.004
Originator: TC
Authorization:
Total Pages: 1

Advertisement

loading

Summary of Contents for Epson 2200 - Stylus Photo Color Inkjet Printer

  • Page 1 This bulletin was created to inform you of a Windows XP warning message that comes up when an EPSON HI-SPEED USB (USB 2.0) Printer or All-in-One device is connected to a non-HI-SPEED USB (USB 1.1) Port. The message is only an indication that Windows XP recognizes a USB 2.0 device is connected to a USB 1.1 port.
  • Page 2 This bulletin was created to inform you of a firmware update required for the EpsonNet 802.11b Wireless Print Server. Reasons: If any existing OS X system is updated to version 10.2.3, the Epson Stylus Photo 2200 printer cannot be found in the Apple Print Center. Recommendations: Verify the current version of the firmware on the Print Server.
  • Page 3 Finish the print server configuration, then Quit WP-ADMIN. Search for the printer: Once the update is complete, open the Print Center. Select ADD Printer and choose Epson AppleTalk. This will allow you to select the Stylus Photo 2200 printer. Page 2 of 2...
  • Page 4 This bulletin was created to inform you of a firmware update required for the EpsonNet 802.11b Wireless Print Server. Reasons: If any existing OS X system is updated to version 10.2.3, the Epson Stylus Photo 2200 printer cannot be found in the Apple Print Center. Recommendations: Verify the current version of the firmware on the Print Server.
  • Page 5 Finish the print server configuration, then Quit WP-ADMIN. Search for the printer: Once the update is complete, open the Print Center. Select ADD Printer and choose Epson AppleTalk. This will allow you to select the Stylus Photo 2200 printer. Page 2 of 2...
  • Page 6 C ontact your dealer for replacem ent. Parts inside your printer at the end of their service life. Contact your dealer for replacement. For information on finding your nearest authorized servicer contact Epson at 1-800-922-8911 or go to WWW.EPSON.COM. Page 1 of 1...