EPSON Stylus PHOTO 2100/2200
4.
Remove the Grounding Spring that engages the Paper Eject Roller Shaft A and
Left Frame.
Grounding Spring
Figure 4-132. Removing the Grounding Spring
5.
Release the hooks of the Bushes 6, which are located on the left and right of the
Paper Eject Roller Shaft A, from the Left and Right Frames, and turn the Bushes 6
to the rear as seen from the printer front.
Figure 4-133. Releasing the Bushes 6
DISASSEMBLY AND ASSEMBLY
Bushes 6
Paper Eject Roller Shaft A
6.
After lifting the Paper Eject Roller Shaft A up as viewed from the printer front,
release the left side Bush 6 from the Left Frame, and pull and remove the Paper
Eject Roller Shaft A to the diagonal top right.
2
Paper Eject Roller Shaft A
Figure 4-134. Removing the Paper Eject Roller Shaft A
When mounting the Carriage Lock Lever located on the right of
the Paper Eject Roller Shaft A as viewed from the printer front,
face its L-shaped leg frontward.
Refer to Figure 4-135, "Orientation of Mounting the Carriage
Lock Lever".
Figure 4-135. Orientation of Mounting the Carriage Lock Lever
Disassembly
3
1
Carriage Lock
L-shaped leg
Lever
Revision B
180