Epson 2200 - Stylus Photo Color Inkjet Printer Service Manual page 98

EPSON Stylus PHOTO 2100/2200
Occurrence Timing Phenomenon Detail
At power-on At power-on, the ASF unit does
not operate at all.
At power-on, the ASF unit does
not operate at all.
TROUBLESHOOTING
Table 3-17. Phenomenon-Based Fatal Error Check Points
Faulty Part/Part
Name
ASF motor 1. Check that the ASF motor connector cable is connected to CN8
on the Main board correctly.
Left rear side
2. Using a tester, check that the resistance of the ASF motor is
7.0Ω ± 10%. (Across Pins 1 and 3 and across Pins 2 and 4,
respectively)
3. Check the ASF motor connector cable for damage.
Extension spring 1. Check that the Extension spring 0.618 is mounted between the
0.618 DE lock lever and DE unit.
2. Check the Extension spring 0.618 for damage.
Troubleshooting
Check Point
ASF motor
Extension spring 0.618
DE lock lever
Revision B
Remedy
1. Connect the ASF motor connector cable to
CN8 on the Main board correctly.
2. If the resistance value is abnormal, change the
ASF motor for a new one.
3. Change the ASF motor for a new one.
1. Install the Extension spring 0.618 between the
DE lock lever and DE unit.
2. Change the Extension spring 0.618 for a new
one.
98