Epson 2200 - Stylus Photo Color Inkjet Printer Service Manual page 155

EPSON Stylus PHOTO 2100/2200
14. Remove the one screw 9) C.B.S (P4) 3
Adjust Parallelism Bush, and while pulling the upper side (tooth surface) of the
Right Adjust Parallelism Bush to the front slightly as viewed from the printer right
side, turn it counterclockwise to release the two hooks, and then remove the Right
Adjust Parallelism Bush.
C.B.S(P4) 3×6
Hooks
Printer right side
Figure 4-77. Removing the Right Adjust Parallelism Bush
DISASSEMBLY AND ASSEMBLY
×
6 (6±1kgf.cm) that secures the Right 15. Release the Shaft Fixing Plate (Right) from the joggle on the right of the Frame,
and turn it to remove from the Carriage Guide Shaft A.
Carriage Guide
Shaft A
Figure 4-78. Removing the Shaft Fixing Plate (Right)
16. Slide the Carriage Guide Shaft A to the right as seen from the printer front to
remove its left end from the Frame.
Disassembly
Revision B
Shaft Fixing Plate
(Right)
Joggle
155