The Message "Epsonnet Config Cannot Be Used Because No Network Is Installed." Appears When You Start Epsonnet Config; Unable To Start Epsonnet Config With Web Browser Or Remote Manager; The Model Name And Ip Address Do Not Appear In The Epsonnet Config Dialog Box; Printing A Network Status Sheet (Large Format Inkjet Printers) - Epson SureColor F-Series Network Manual

The message "EpsonNet Config cannot be used because no
network is installed." appears when you start EpsonNet Config.
Cause
TCP/IP is not installed on the
computer.
TCP/IP is installed on the computer,
but its IP address is not set correctly.
Unable to start EpsonNet Config with Web Browser or Remote
Manager.
Cause
You have not set the IP address for
the network interface.
The Model Name and IP Address do not appear in the EpsonNet
Config dialog box.
Cause
If the valid IP address is not set, the
model name and IP address may
not appear.

Printing a Network Status Sheet (Large Format Inkjet Printers)

Before you start configuring the network interface, be sure to print a network status sheet
that contains important information such as the current configuration and the MAC address
of the network interface.
To print a network status sheet, see the printer's User Guide.
What to do
Install the TCP/IP protocol.
Set a correct IP address for the computer.
What to do
Set the IP address for the network interface using
EpsonNet Config for Windows or Mac OS, or the printer's
control panel. You can check the IP address on a status
sheet. See the EpsonNet Config User's Guide.
What to do
Set a valid IP address.
Refresh the status by selecting Refresh from the View
menu.
Increase the length of time before a timeout. To do this,
select Options from the Tool menu, and then select
Timeout. Note that doing so can cause EpsonNet Config
to run slower.
47
Troubleshooting