Cisco 4215 - Intrusion Detection Sys Sensor Configuration Manual page 70

Configuring Time
Configure the end summertime parameters:
Step 6
Type the day of the week you want to end summertime settings:
a.
sensor(config-hos-rec-end)# day-of-week friday
Type the month you want to end summertime settings:
b.
sensor(config-hos-rec-end)# month october
Type the time of day you want to end summertime settings:
c.
sensor(config-hos-rec-end)# time-of-day 05:15:00
The format is hh:mm:ss.
Type the week of the month you want to end summertime settings:
d.
sensor(config-hos-rec-end)# week-of-month last
The values are first through fifth, or last.
Verify your settings:
e.
sensor(config-hos-rec-end)# show settings
sensor(config-hos-rec-end)#
Step 7 Specify the local time zone used during summertime:
sensor(config-hos-rec-end)# exit
sensor(config-hos-rec)# summertime-zone-name CDT
Specify the offset:
Step 8
sensor(config-hos-rec)# offset 60
Note
Verify your settings:
Step 9
sensor(config-hos-rec)# show settings
recurring
-----------------------------------------------
Cisco Intrusion Prevention System Sensor CLI Configuration Guide for IPS 5.0
4-24
end-summertime
-----------------------------------------------
month: october default: october
week-of-month: last default: last
day-of-week: friday default: sunday
time-of-day: 05:15:00 default: 02:00:00
-----------------------------------------------
Changing the time zone offset requires the sensor to reboot.
offset: 60 minutes default: 60
summertime-zone-name: CDT
start-summertime
-----------------------------------------------
month: april default: april
week-of-month: first default: first
day-of-week: monday default: sunday
time-of-day: 12:00:00 default: 02:00:00
-----------------------------------------------
end-summertime
-----------------------------------------------
month: october default: october
week-of-month: last default: last
day-of-week: friday default: sunday
time-of-day: 05:15:00 default: 02:00:00
Chapter 4 Initial Configuration Tasks
78-16527-01