Cisco 4215 - Intrusion Detection Sys Sensor Configuration Manual page 326

Installing System Images
Cisco Systems, Inc.
Services engine helper utility for NM-CIDS
Version 1.0.17-1 [200305011547]
——-
Main menu
1 - Download application image and write to HDD
2 - Download bootloader and write to flash
3 - Display software version on HDD
4 - Display total RAM size
5 - Change file transfer method (currently secure shell)
r - Exit and reset Services Engine
h - Exit and shutdown Services Engine
Selection [1234rh]:
Choose the transfer method (SSH is the default):
Step 14
For SSH, continue with Step 15.
a.
For TFTP, continue with Steps 16 and 17.
b.
Download the bootloader image and write it to flash:
Step 15
Type
a.
Specify the SSH server username and password.
b.
Type the SSH server IP address.
c.
Type the full pathname of bootloader image from the root directory:
d.
Selection [1234rh]:servicesengine-boot-1.0-17-1_dev.bin
Ready to begin
Are you sure? y/n
e. Type
The operation was successful
You are returned to the main menu with the
Configure TFTP as the transfer method:
Step 16
Type
a.
Type
b.
Type
c.
Download the bootloader image and write it to flash:
Step 17
Type
a.
Type the TFTP server IP address.
b.
Type the path from the TFTP root directory:
c.
Selection [1234rh]:servicesengine-boot-1.0-17-1_dev.bin
Ready to begin
Are you sure? y/n
Type
d.
You are returned to the main menu with the
Step 18 Type
Selection [1234rh]: r
About to exit and reset Services Engine.
Are you sure? [y/N]
Cisco Intrusion Prevention System Sensor CLI Configuration Guide for IPS 5.0
17-24
.
2
to continue.
y
.
5
to change to TFTP.
2
to return to the Main menu.
r
.
2
to continue.
y
to reboot NM-CIDS:
r
Chapter 17 Upgrading, Downgrading, and Installing System Images
prompt. Continue with Step 18.
Selection [1234rh]:
prompt. Continue with Step 18.
Selection [1234rh]:
78-16527-01