Cisco 4215 - Intrusion Detection Sys Sensor Configuration Manual page 212

Displaying the Current Submode Configuration
-----------------------------------------------
sensor(config-ana)# exit
sensor(config)# exit
sensor#
Display the current configuration of the service authentication submode:
Step 3
sensor# configure terminal
sensor(config)# service authentication
sensor(config-aut)# show settings
attemptLimit: 0 <defaulted>
sensor(config-aut)# exit
sensor(config)# exit
sensor#
Display the current configuration of the service event-action-rules submode:
Step 4
sensor# configure terminal
sensor(config)# service event-action-rules rules0
sensor(config-rul)# show settings
variables (min: 0, max: 256, current: 0)
-----------------------------------------------
-----------------------------------------------
overrides (min: 0, max: 12, current: 0)
-----------------------------------------------
-----------------------------------------------
filters (min: 0, max: 4096, current: 0 - 0 active, 0 inactive)
-----------------------------------------------
general
-----------------------------------------------
-----------------------------------------------
target-value (min: 0, max: 5, current: 0)
-----------------------------------------------
-----------------------------------------------
sensor(config-rul)#
Step 5 Display the current configuration of the service host submode:
sensor# configure terminal
sensor(config)# service host
sensor(config-hos)# show settings
network-settings
-----------------------------------------------
-----------------------------------------------
time-zone-settings
Cisco Intrusion Prevention System Sensor CLI Configuration Guide for IPS 5.0
12-4
-----------------------------------------------
-----------------------------------------------
-----------------------------------------------
global-overrides-status: Enabled <defaulted>
global-filters-status: Enabled <defaulted>
global-summarization-status: Enabled <defaulted>
global-metaevent-status: Enabled <defaulted>
global-deny-timeout: 3600 <defaulted>
global-block-timeout: 30 <defaulted>
max-denied-attackers: 10000 <defaulted>
host-ip: 10.89.130.108/23,10.89.130.1 default: 10.1.9.201/24,10.1.9.1
host-name: sensor default: sensor
telnet-option: enabled default: disabled
access-list (min: 0, max: 512, current: 1)
-----------------------------------------------
network-address: 0.0.0.0/0
-----------------------------------------------
-----------------------------------------------
ftp-timeout: 300 seconds <defaulted>
login-banner-text: <defaulted>
Chapter 12 Working With Configuration Files
78-16527-01