Zone Names - Cisco 4215 - Intrusion Detection Sys Sensor Configuration Manual

Appendix C Troubleshooting
-----------------------------------------------
sensor(config-log)#
Exit the logger submode:
Step 14
sensor(config-log)# exit
Apply Changes:?[yes]:
Press Enter to apply changes or type
Step 15

Zone Names

Table C-1
Table C-1
Zone Name
AuthenticationApp
Cid
Cli
IdapiCtlTrans
IdsEventStore
MpInstaller
cmgr
cplane
csi
ctlTransSource
intfc
nac
sensorApp
tls
1. The Card Manager service is used on AIP-SSM to exchange control and state information
2. The Control Plane is the transport communications layer used by Card Manager on
78-16527-01
zone-name: ctlTransSource
severity: warning <defaulted>
<protected entry>
zone-name: intfc
severity: warning <defaulted>
<protected entry>
zone-name: nac
severity: debug default: warning
<protected entry>
zone-name: sensorApp
severity: warning <defaulted>
<protected entry>
zone-name: tls
severity: warning <defaulted>
lists the debug logger zone names:
Debug Logger Zone Names
Description
Authentication zone
General logging zone
CLI zone
All control transactions zone
Event Store zone
IDSM-2 master partition installer zone
Card Manager service zone
Control Plane zone
CIDS Servlet Interface
Outbound control transactions zone
Interface zone
Network Access Controller zone
AnalysisEngine zone
SSL and TLS zone
between modules in the chassis.
AIP-SSM.
Cisco Intrusion Prevention System Sensor CLI Configuration Guide for IPS 5.0
to discard them:
no
1
2
3
Troubleshooting the 4200 Series Appliance
C-27