Upgrading The Ids-4215 Bios And Rommon - Cisco 4215 - Intrusion Detection Sys Sensor Configuration Manual

Configuration guide
Hide thumbs Also See for 4215 - Intrusion Detection Sys Sensor:
Table of Contents

Advertisement

Chapter 17
Upgrading, Downgrading, and Installing System Images
Specify the path and filename on the TFTP file server from which you are downloading the image:
Step 10
rommon> file path/filename
UNIX example:
rommon> file /system_images/IDS-4215-K9-sys-1.1-a-5.0-1.img
Note
Windows example:
rommon> file C:\tftp_directory\IDS-4215-K9-sys-1.1-a-5.0-1.img
Download and install the system image:
Step 11
rommon> tftp
Note

Upgrading the IDS-4215 BIOS and ROMMON

The BIOS/ROMMON upgrade utility (IDS-4215-bios-5.1.7-rom-1.4.bin) upgrades the BIOS of
IDS-4215 to version 5.1.7 and the ROMMON to version 1.4.
To upgrade the BIOS and ROMMON on IDS-4215, follow these steps:
Download the BIOS ROMMON upgrade utility (IDS-4215-bios-5.1.7-rom-1.4.bin) to the TFTP root
Step 1
directory of a TFTP server that is accessible from IDS-4215.
For the procedure for locating software on Cisco.com, see
Note
Boot IDS-4215.
Step 2
While rebooting, IDS-4215 runs the BIOS POST. After the completion of POST, the console displays
the message:
Press Ctrl-R while this message is displayed to display the ROMMON menu.
Step 3
The console display resembles the following:
CISCO SYSTEMS IDS-4215
Embedded BIOS Version 5.1.3 05/12/03 10:18:14.84
Compiled by ciscouser
Evaluating Run Options ...
Cisco ROMMON (1.2) #0: Mon May 12 10:21:46 MDT 2003
Platform IDS-4215
0: i8255X @ PCI(bus:0 dev:13 irq:11)
78-16527-01
The path is relative to the UNIX TFTP server's default tftpboot directory. Images located in the
default tftpboot directory do not have any directory names or slashes in the file location.
IDS-4215 reboots several times during the reimaging process. Do not remove power from
IDS-4215 during the update process or the upgrade can become corrupted.
Make sure you can access the TFTP server location from the network connected to the Ethernet
port of IDS-4215.
Evaluating Run Options ...
Cisco Intrusion Prevention System Sensor CLI Configuration Guide for IPS 5.0
Obtaining Cisco IPS Software, page
for about 5 seconds.
Installing System Images
18-1.
17-13

Advertisement

Table of Contents
loading

Table of Contents