Cisco 4215 - Intrusion Detection Sys Sensor Configuration Manual page 267

Chapter 15 Configuring IDSM-2
---- -----------------------
147
The command and control port number is always 2.
Session to IDSM-2 and ping a network IP address:
Step 4
cat6k> session slot_number
idsm-2# ping network_ip_address
Example:
console> (enable) session 6
Trying IDS-6...
Connected to IDS-6.
Escape character is '^]'.
login: cisco
Password:
Last login: Thu Mar 3 09:40:53 from 127.0.0.11
***NOTICE***
This product contains cryptographic features and is subject to United States and local
country laws governing import, export, transfer and use. Delivery of Cisco cryptographic
products does not imply third-party authority to import, export, distribute or use
encryption. Importers, exporters, distributors and users are responsible for compliance
with U.S. and local country laws. By using this product you agree to comply with
applicable laws and regulations. If you are unable to comply with U.S. and local laws,
return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.
***LICENSE NOTICE***
There is no license key installed on the system.
Please go to http://www.cisco.com/go/license to obtain a new license or install a license.
idsm-2# ping 10.89.149.126
PING 10.89.149.126 (10.89.149.126): 56 data bytes
64 bytes from 10.89.149.126: icmp_seq=0 ttl=255 time=0.3 ms
64 bytes from 10.89.149.126: icmp_seq=1 ttl=255 time=0.3 ms
64 bytes from 10.89.149.126: icmp_seq=2 ttl=255 time=0.3 ms
64 bytes from 10.89.149.126: icmp_seq=3 ttl=255 time=0.3 ms
--- 10.89.149.126 ping statistics ---
4 packets transmitted, 4 packets received, 0% packet loss
round-trip min/avg/max = 0.3/0.3/0.3 ms
idsm-2# exit
cat6k> (enable)
Initialize IDSM-2.
Step 5
For the procedure, see
Ping the default router of IDSM-2.
Step 6
Verify the management station can ping, SSH or Telnet, and web browse to IDSM-2.
Step 7
78-16527-01
Configuring the Catalyst 6500 Series Switch for Command and Control Access to IDSM-2
2/5,2/16-18
6/2
Initializing the Sensor, page
Cisco Intrusion Prevention System Sensor CLI Configuration Guide for IPS 5.0
3-2.
15-5