Cisco 4215 - Intrusion Detection Sys Sensor Configuration Manual page 334

Installing System Images
Note
Step 3 Log in as user
Note
login: guest
password: cisco
Maintenance image version: 2.1(2)
guest@idsm2.localdomain#
View the maintenance partition host configuration:
Step 4
guest@idsm2.localdomain# show ip
IP address
Subnet Mask
IP Broadcast
DNS Name
Default Gateway : 10.89.149.126
Nameserver(s)
guest@idsm2.localdomain#
Clear the maintenance partition host configuration (ip address, gateway, hostname):
Step 5
guest@idsm2.localdomain# clear ip
guest@localhost.localdomain# show ip
IP address
Subnet Mask
IP Broadcast
DNS Name
Default Gateway : 0.0.0.0
Nameserver(s)
guest@localhost.localdomain#
Configure the maintenance partition host configuration:
Step 6
Specify the IP address:
a.
guest@localhost.localdomain# ip address ip_address netmask
Specify the default gateway:
b.
guest@localhost.localdomain# ip gateway gateway_ip_address
Specify the hostname:
c.
guest@localhost.localdomain# ip host hostname
Cisco Intrusion Prevention System Sensor CLI Configuration Guide for IPS 5.0
17-32
You cannot Telnet or SSH to the IDSM-2 maintenance partition.You must session to it from the
switch CLI.
and password
guest
You can change the guest password, but we do not recommend it. If you forget the maintenance
partition guest password, and you cannot log in to the IDSM-2 application partition for some
reason, you will have to RMA IDSM-2.
: 10.89.149.74
: 255.255.255.128
: 10.255.255.255
: idsm2.localdomain
:
: 0.0.0.0
: 0.0.0.0
: 0.0.0.0
: localhost.localdomain
:
Chapter 17 Upgrading, Downgrading, and Installing System Images
.
cisco
78-16527-01