Monitoring And Maintaining An On-Demand Address Pool; Configuring Odaps To Obtain Subnets Through Ipcp Negotiation - Cisco 10000-2P2-2DC Software Configuration Manual

Chapter 10 Configuring Address Pools
Example 10-7 Defining DHCP ODAPs on an Interface
!
interface Virtual-Template1

Configuring ODAPs to Obtain Subnets Through IPCP Negotiation

Example 10-8
address pool using IPCP as the subnet allocation protocol, and configures the Ethernet0 interface to
automatically obtain its IP address from the my_pool address pool.
Example 10-8 Enabling ODAPs to Obtain Subnets Through IPCP Negotiation
!
ip dhcp pool my_pool
!
interface Ethernet0
!

Monitoring and Maintaining an On-Demand Address Pool

To monitor and maintain an ODAP, enter the following commands in privileged EXEC mode:
Command
Router# clear ip dhcp [pool name] binding {* |
address}
Router# clear ip dhcp [pool name] conflict {* |
address}
Router# clear ip dhcp [pool name] subnet {* |
address}
Router# debug dhcp details
Router# debug ip dhcp server events
Router# show ip dhcp import
OL-2226-23
ip vrf forwarding green
ip unnumbered loopback1
ppp authentication chap
peer default ip address dhcp-pool
creates a DHCP address pool named my_pool, configures the pool as an on-demand
import all
origin ipcp
ip address pool my_pool
ip verify unicast reverse-path
shutdown
hold-queue 32 in
Purpose
Deletes an automatic address binding or objects for a specific
pool from the DHCP server database.
Clears an address conflict(s) for a specific pool from the DHCP
server database.
Clears all currently leased subnets in the specified DHCP pool or
in all DHCP pools if you do not specify a specific pool.
Monitors subnet allocation and subnet releases for the on-demand
address pools.
Reports DHCP server events, such as assignments and database
updates.
Displays the option parameters imported into the DHCP server
database.
Cisco 10000 Series Router Software Configuration Guide
On-Demand Address Pool Manager
10-15