Document Conventions - Cisco 10000-2P2-2DC Software Configuration Manual

Document Conventions

Chapter Title
Chapter 23 Protecting the Router from DoS Attacks
Chapter 24 IP Tunneling
Appendix A RADIUS Attributes
This guide also includes a Glossary and an Index.
Document Conventions
This guide uses the following conventions:
•
•
•
•
•
•
•
•
Means reader take note. Notes contain helpful suggestions or references to material not covered in the
Note
guide.
Timesaver Means the described action saves time. You can save time by performing the action described in the
paragraph.
Means reader be careful. In this situation, you might do something that could result in equipment
Caution
damage or loss of data.
Means danger. You are in a situation that could cause bodily injury. Before you work on any
Warning
equipment, you must be aware of the hazards involved with electrical circuitry and familiar with
standard practices for preventing accidents. To see translated versions of warnings, refer to the
Regulatory Compliance and Safety Information document that accompanied the device.
Cisco 10000 Series Router Software Configuration Guide
xxxii
Bold is used for commands, keywords, and buttons.
Italics are used for command input for which you supply values.
Screen font is used for examples of information that are displayed on the screen.
Bold screen font is used for examples of information that you enter.
Vertical bars ( | ) indicate separate alternative, mutually exclusive elements.
Square brackets ( [ ] ) indicate optional elements.
Braces ( {} ) indicate a required choice.
Braces within square brackets ( [{}] ) indicate a required choice within an optional element.
Description
Describes how to protect against denial of service (DoS)
attacks.
Describes the Generic Routing Encapsulation Tunnel IP Source
and Destination VRF Membership feature.
Lists RADIUS attributes that the Cisco 10000 series router
supports.
About This Guide
OL-2226-23