Feature History For Radius Packet Of Disconnect; Benefits For Radius Packet Of Disconnect; Restrictions For Radius Packet Of Disconnect - Cisco 10000-2P2-2DC Software Configuration Manual

RADIUS Packet of Disconnect
•
The data parameters are the following RADIUS attributes:
•
•
•
•
For information about RADIUS attributes, see
The RADIUS Packet of Disconnect feature is discussed in the following topics:
•
•
•
•
•
•
•
•

Feature History for RADIUS Packet of Disconnect

Cisco IOS Release
12.3(7)XI1
12.2(28)SB

Benefits for RADIUS Packet of Disconnect

•

Restrictions for RADIUS Packet of Disconnect

Proper matching identification information must be communicated by the:
•
•
•
Cisco 10000 Series Router Software Configuration Guide
16-56
To prevent unauthorized servers from disconnecting users, the authorizing agent that issues the POD
packet must include three parameters in its packet of disconnect request. For a session to be
disconnected, all parameters must match their expected values at the router. If the parameters do not
match, the router discards the packet of disconnect packet and sends a NACK (negative
acknowledgement message) to the agent.
User- Name (RADIUS IETF attribute 1)
Framed-IP-Address (RADIUS IETF attribute 8)
Acct-Session-Id (RADIUS IETF attribute 44)
Session-Svr-Key (vendor-proprietary RADIUS attribute 151)
Feature History for RADIUS Packet of Disconnect, page 16-56
Benefits for RADIUS Packet of Disconnect, page 16-56
Restrictions for RADIUS Packet of Disconnect, page 16-56
Related Documents for RADIUS Packet of Disconnect, page 16-57
Prerequisites for RADIUS Packet of Disconnect, page 16-57
Configuration Tasks for RADIUS Packet of Disconnect, page 16-57
Monitoring and Maintaining AAA POD Server, page 16-59
Configuration Example for RADIUS Packet of Disconnect, page 16-59
Description
This feature was introduced on the Cisco 10000 series
router.
This feature was integrated into Cisco IOS Release
12.2(28)SB.
Ability to terminate an established session
Billing server and router configuration
Router's original accounting start request
Server's POD request
Chapter 16
Appendix A, "RADIUS Attributes".
Configuring RADIUS Features
Required PRE
PRE2
PRE2
OL-2226-23