Cisco 10000-2P2-2DC Software Configuration Manual page 251

Chapter 8 Configuring ATM Permanent Virtual Circuit Autoprovisioning
Enabling ATM PVC Autoprovisioning on an Individual PVC
To enable ATM PVC autoprovisioning on an individual PVC, enter the following commands beginning
in global configuration mode:
Command
Step 1
Router(config)# interface atm slot/0
[.subinterface-number {multipoint |
point-to-point}]
Step 2
Router(config-if)# pvc [name] vpi/vci
Step 3
Router(config-if-atm-vc)# create
on-demand
Step 4
Router(config-if-atm-vc)# idle-timeout
[time-out-in-seconds]
[minimum-traffic-in-kbps]
Example 8-5
Example 8-5
Router(config)# int atm 3/0/0.1 multipoint
Router(config-subif)# atm pppatm passive
Router(config-subif)# pvc 100/100
Router(config-subif-atm-vc)# create on-demand
Router(config-subif-atm-vc)# idle-timeout 300
Enabling ATM PVC Autoprovisioning on a Range of PVCs
To enable ATM PVC autoprovisioning on a range of PVCs, enter the following commands beginning in
global configuration mode.
Command
Step 1
Router(config)# interface atm slot/0
[.subinterface-number {multipoint |
point-to-point}]
Step 2
Router(config-if)# range [range-name] pvc
start-vpi/start-vci end-vpi/end-vci
OL-2226-23
Purpose
Specifies the ATM interface and enters interface or subinterface
configuration mode.
Specifies the ATM PVC and enters atm-vc configuration mode.
Enables PVC autoprovisioning on the individual PVC.
(Optional) Enables the idle-timeout timer on the individual
on-demand PVC.
The default time-out-in-seconds is 0 (no idle-timeout).
The Cisco 10000 series router waits until the traffic on a
particular VC is processed before tearing down the VC, even if
you specify the minimum-traffic-in-kbps option or if the VC is
idle during the idle-timeout period.
enables autoprovisioning on PVC 100/100 and sets the idle-timeout timer for 300 seconds.
Enabling ATM PVC Autoprovisioning on a PVC
Purpose
Specifies the ATM interface and enters interface or subinterface
configuration mode.
Specifies the range of PVCs and enters atm-range configuration
mode.
Cisco 10000 Series Router Software Configuration Guide
ATM PVC Autoprovisioning
8-9