Table of Contents
Advertisement
Chapter 25
Configuring Template ACLs
Command
Router# show access-list template {summary | aclname
| exceed number | tree}
show access-list template Command Modes
Use the show access-list template command in EXEC mode.
show access-list template Command History
Cisco IOS Release
12.2(28)SB
Examples
This section provides examples of the different forms of the show access-list template command.
show access-list template summary
The following example shows output from the show access-list template summary command:
Router# show access-list template summary
Maximum rules per template ACL = 100
Templates active = 1
Number of ACLs those templates represent = 50
Number of tree elements = 1
Output from this command includes:
•
•
•
OL-2226-23
Description
This command was introduced on the Cisco 10000 series router.
Maximum number of rules per Template ACL
Number of discovered active templates
Number of ACLs replaced by those templates
Configuration Examples for Template ACLs
Purpose
Displays information about ACLs.
summary displays summary information.
aclname displays information about the specified ACL.
exceed number identifies Template ACLs that replace more
than number individual ACLs.
tree provides an easily readable summary of the frequency of
use of each of the ACL types that the Template ACL function
sees
Output from this command includes the following
information for each entry on the Red-Black tree:
CRC32 value
•
For each ACL associated with a particular CRC32:
•
Primary ACL name
–
Number of users of that ACL
–
Cisco 10000 Series Router Software Configuration Guide
25-7
Advertisement
Table of Contents
Troubleshooting
