Configuring Session Limit Per Vrf - Cisco 10000-2P2-2DC Software Configuration Manual

Session Limit Per VRF

Configuring Session Limit Per VRF

To configure the session limit Per VRF feature on the Cisco 10000 series router, enter the following
commands beginning in global configuration mode:
Command
Step 1
Router(config)# vpdn enable
Step 2
Router(config)# vpdn session-limit
sessions
Step 3
Router(config)# vpdn-template
template-name
Step 4
Router(config-vpdn)# group session-limit
number
Step 5 Repeat steps 2 and 3 to configure additional named VPDN templates.
Step 6
Router(config-vpdn)# exit
Step 7
Router(config)# vpdn-group tag
Step 8
Router(config-vpdn)# accept-dialin
or
Router(config-vpdn)# request-dialout
Step 9
Router(config-vpdn-acc-in)# protocol
protocol
or
Router(config-vpdn-req-out)# protocol
protocol
Step 10
Router(config-vpdn-acc-in)# exit
or
Router(config-vpdn-req-out)# exit
Step 11
Router(config-vpdn)# source vpdn-template
template-name
Cisco 10000 Series Router Software Configuration Guide
4-18
Chapter 4
Purpose
Enables virtual private dialup networking (VPDN) on the router
and informs the router to look for tunnel definitions in a local
database and on a remote authorization server if one is present.
Limits the number of simultaneous VPN sessions that can be
established on a router.
The sessions option is the maximum number of simultaneous
VPN sessions that you want to allow on a router. Valid values are
1 to 10,000.
Configures a VPDN template and enters VPDN group
configuration mode.
The template-name option is the name of the VPDN template
Specifies the maximum concurrent sessions allowed across all
VPDN groups associated with the VPDN template you specified
in step 3.
The number option is a value from 1 to 32,767.
Exits VPDN group configuration mode.
Associates a VPDN group to a customer or VPDN profile.
The tag option is the name of the VPDN group.
Enables the router to accept dialin requests and enters VPDN
accept-dialin group configuration mode.
Enables the router to send L2TP dialout requests and enters
VPDN request-dialout group configuration mode.
Specifies the tunneling protocol to be used.
Exits VPDN accept-dialin or VPDN request-dialout group
configuration mode.
Configures the VPDN group to use the VPDN template settings
for all unspecified parameters.
The template-name option is the name of the VPDN template to
be associated with a VPDN group.
Configuring Multiprotocol Label Switching
OL-2226-23